Back Pressure Regulators

The Equilibar Back Pressure Regulator is our core technology. It features a flexible diaphragm as its only moving part to provide frictionless, stable operation. The Equilibar’s dome- loaded, multiple orifice design offers instantaneous control and exceptional precision for the most complex applications.

Sanitary Valves

Equilibar® FD sanitary valves are designed with special features for biopharmaceutical and other sanitary applications.

Single-Use Products

The Equilibar® dome loaded multi-orifice valve technology is now available in a single use valve. The patent pending Equilibar® SD series single use valves are manufactured using USP Class VI polymers and stainless steel. The disposable valve body made of polymer is inserted into a stainless-steel support housing with wing nut closure for quick and easy assembly. The Equilibar single use valve for bioprocessing systems is a revolutionary design in single use pressure control.

Flow Control Valves

Precision control across an ultra-wide range of flow rates for gases, liquids and mixed-phase fluids.

The Equilibar® advanced flow control valve works in a control loop with an electronic controller and a flow meter. For demanding flow control applications where the supply pressure is largely stable, Equilibar customers have discovered significant benefits including wide Cv range capability, chemical compatibility and multiphase fluid handling.

Vacuum Regulators

The Equilibar® vacuum regulator (EVR) uses multiple orifices sealed by a flexible diaphragm instead of a single large valve seat. The EVR is dome-loaded by a pneumatic pilot regulator setting the vacuum setpoint. As flow requirements change, the diaphragm moves a few millimetres to open and close over some or all of the orifices, providing instantaneous and frictionless control. The pneumatic pilot setpoint pressure may be set with a manual or electronic vacuum pilot regulator.

EVR is available in sizes from 1/4″ to 4″ ports.

Pressure Reducing Regulators

Pressure Reducing Regulators for Air and inert gases

Pressure Reducing Regulators (PRR) are the most common type of pressure regulator. They reduce an unregulated inlet pressure down to a desired regulated outlet pressure.
The manual PRRs listed below are recommended as pilot pressure regulators for Equilibar back pressure regulators. All PRRs listed are designed for use with air or inert gas* and have a small but significant weep to the atmosphere.

-Lowest pressure range available in its class -For low-flow or no-flow applications only -Extremely sensitive and stable -For air and inert gases* Model output ranges: 0.3 – 7 inH20 / 0.75 – 17 mbar(g) up to 1 – 28 inH20 / 2.5 – 69.7 mbar(g)
-High Accuracy -Superior Sensitivity -Light Weight -Compact Size -Many Available Options <b>Model output ranges: 0 – 0.7 psig / 48 mbar(g) up to 0 – 5 psig / 345 mbar(g)
-Wide range of pressures available -Economical -More rugged construction than other regulators in its class <b>Model output ranges:</b> 0 – 2 psig / 0.1 bar(g) up to up to<br> 5 – 400 psig / 0.35 – 27.5 bar(g)
-Low flow for precision laboratory & research applications -Self-venting through bonnet for convenient pressure control -Wide range of pressures, up to 10,000 psig -In stock for quick delivery Model output ranges: 5 – 250 psig / 0.3 – 17 bar(g) up to 100 – 10,000 psig / 6.9 – 689 bar(g)

Electronic Pressure Regulators

Equilibar offers a wide range of precision electronic pressure regulators (EPRs) for controlling air or inert gas for various applications. These are recommended for controlling the pilot reference setpoint pressure for Equilibar dome-loaded back pressure regulators and vacuum regulators. All models shown here are designed for use with air or inert gases in non-hazardous/non-explosive environments. For information about ATEX-rated controllers, please contact us.

For best performance when using these EPRs as a pilot setpoint regulator for an Equilibar BPR, a tubing connection between the outlet of the electronic regulator and the dome of the BPR should have a minimum volume of 2 cubic inches / 35cc.

Control below 1000psig

New digital pressure control technology with integrated microcontroller. Configured to meet specified range from vacuum to 150 psig / 10 bar(g) – Dual proportional valve control with integrated digital microcontroller – Closed loop control – 4-20mA, 0-10V or 3.3V serial command – Gauge, vacuum, and absolute pressure models – No integral bleed required – IP65 enclosure – CE models available
New digital pressure control technology with integrated microcontroller. Configured to meet specified range up to 500 psig /35 bar(g) – Dual proportional valve control with integrated digital microcontroller – Closed loop control – 4-20mA, 0-10V or 3.3V serial command – Gauge, vacuum, and absolute pressure models – No integral bleed required – IP65 enclosure – CE models available
Digital electronic pressure control with microprocessor and keypad control. Series of models to specified range from vacuum to 150, 500, 1000 or 3000 psig / 10, 35, 70 or 200 bar(g) – Dual proportional valve control with digital microprocessor – Closed loop control – Gauge, vacuum, and absolute pressure models – Direct control from keypad – No integral bleed required – Ip40 enclosure – CE models available
Standard analog electrnic pressure controller. Easily modified for custom applications. Configured to meet specified range from vacuum to 150 psig / 10 bar(g) – Dual proportional valve control with analog electronic control circuit – Closed loop control – 4-20mA or 0-10V command] – Gauge, vacuum, and absolute pressure models – Bleed orifice for static applications or dynamic applications needing max stability – IP65 enclosure – CE models available
Standard analog electronic pressure controller. Easily modified for custom applications. Configured to meet specified range up to 500 psig /35 bar(g) max -Dual valve control with analog electronic control circuit – Closed loop control – 4-20mA or 0-10V command – Gauge, vacuum, and absolute pressure models – IP65 enclosure – CE models available
Standard analog electronic pressure controller. Easily modified for custom applications. Configured to meet specified range up to 1000 psig /69 bar(g) max – Dual valve control with analog electronic control circuit – 4-20mA, 0-10V and RS232 digital command options – Gauge, vacuum, and absolute pressure model – No gas consumed at steady state – IP65 enclosure

Control Above 1000 psig

Precise, convenient control up to 3000 psig / 207 bar(g) – For inert gas – Dual analog valve constructionbr – No gas supply wasted at steady state – Very high resolution with 0.25% accuracy – Digital or analog communications with keypad option – Not intended for hazardous/explosive environments The EPR-3000 can be quickly commanded using the convenient keypad interface. For system automation, the device can be automated through either the 0 – 5 VDC analog interface or by use of a Serial (RS-458) connection. Power supply for the unit (12 – 30 VDC) can be provided through an included power brick, or provided through the DIN connector.

Control above 3000 psig

Precision electronic reference pressure control up to 400 bar / 5800 psi This 400 bar electronic pressure controller contains a PID controller with two proportional valves and an external pressure sensor. The HP ERC achieves incredibly stable pressure control without any overshoot. – For inert gas (N2, air) – Achieves a control stability of <0.1% – Minimal dead volume – Zero consumption of pressurised inert gas- Temperature range: -10°C to 70°C – Digital or analog communication options.
Scroll to Top

Request a Quote

Thank you for visiting our site. Jordan Valves & Controls provides services and products to companies in Australia and New Zealand.

Please provide a detailed description of what you require.

Note 1: If replacing a valve/s, we require a serial number/s

Note 2: Please confirm the following information if applicable:

Your wishlist is empty.

Please provide a detailed description of what you require.
Note 1: If replacing a valve/s, we require a serial number/s
Note 2: Please confirm the following information if applicable:

Your wishlist is empty.